OpenMill 500 – 5 axis milling machine

Hardware acquired today has to be also applicable via simple modifications and supplement of software for future developments within the dental area. This is Laserdentium’s concept. The OpenMill 500 Milling device puts this premise tightly into reality. The equipment has been designed particularly for dry-processing of non-metallic dental restorations and scintillates with a cost effectiveness that can not be beaten.

Its five axis as well as the „actual position control“ allow multiple deployment of the Open Mill 500 Milling Device and ensure simple, precise production of dental restorations, individual abutments, drilling jigs and much more. Due to the tool support with two raw material discs and an automated tool changer (10 tools), overnight production becomes feasible.

Laserdentium’s OpenSystem has been particularly developed for today’s and future demands within the dental lab. This allows return of added value of expensive outsourced service back into the own lab.

Deploying materials by Laserdentium, CAD/CAM will in future also become profitable within the low cost sector.

Arguments for the 5-Axis-Milling machine from Laserdentium

• Open data format – data import in STL industrial standard
• Processing of wax-, PMMA-, composite- and zirconia-blanks
• Optimized for materials from Laserdentium. However, there is no obligation to particular materials or manufacturers!
• 2 holder for blanks of up to Ø 98 mm
• Operator-friendly handling with OpenCAM-software
• More effective processing through complete integration of CAM module into OpenCAD-software
• Position-Accuracy < 10 μm
• Automatic tool changer (11 burs)
• 5,000 – 60,000 R/min spindle-speed
• Milling time per item > 10 minutes (depending from the material)
• High precision due to permanent nominal-actual position-comparison

The Advantages for your Dental Lab

• Increase of the cost effectiveness of your lab due to own production
• Expansion of the application field of an  CAD/CAM system for the low cost sector using Laserdentium Material
• All models in the open STL data format can be processed with the OpenMill 500
• The STL data is imported into the CAM module, located and automatically further processed
• Big work pieces “fit” in thin material discs by activating the 4-axis in insertion direction
• Free choice of materials

Technical data

Included in delivery

• air-pressure filter/regulator
• OpenCAM module
• control-PC (German or English)
• installation
• 1 day training